A Definite Guide to Fix Working Issue

Whether you want change the default Netgear Nighthawk router login details or simply looking to configure it, it is important for you to access But, you are on this post, then you might be facing issues while accessing web address, right? If so, then allow us to ease out the worry lines on your forehead. Go through this article and learn how to fix not working issue in no time.

Before taking you through the fixes mentioned in the article, let us first make you understand what have led you experience the issue. Scroll down a little!

Reasons: Not Working

Mentioned below are some of the topmost reasons that led you to not working issue:

  • The Netgear Nighthawk router is placed away from the reach of your modem

  • The firmware of your Netgear router is outdated

  • Your Netgear router isn’t getting continuous power supply from its respective wall outlet.

  • Technical glitches may also stop you from accessing web address

  • Your internet connection is weak

  • WiFi-enabled devices are not connected to the router’s WiFi

  • The web browser you are using to access Netgear Nighthawk setup page using is outdated

No matter what is the reason behind not working issue, following the fixes mentioned below will surely help you resolve it. Keep scrolling down!

Fix 1: Update the Internet Browser

Updating the internet browser to the most recent version may somehow help you resolve not working issue. Also, to speed up your internet connection while accessing web address, it is suggested to clear cache, cookies, and browsing history.

Fix 2: Use the Correct Web Address

Chances are – while trying to log in to your Netgear router, you didn’t enter the correct web address in the URL bar of the internet browser. So, ensure to have correct admin details of the device else you need to reset nighthawk router.

Don’t know how to reset Nighthawk router? Need not to worry! This article covers the steps to reset Nighthawk router as well.

Reset Nighthawk Router

Here are the guidelines that you need to follow in order to reset Nighthawk router:

  • Look for the Nighthawk router reset hole.

  • Once located, press the reset hole using a pin or a paper clip carefully.

  • Hold it, wait for some time, and release it.

Once you’re done with the resetting process, perform the Netgear Nighthawk setup process again.

Fix 3: Perform Router Firmware Update

Updating the firmware of your Nighthawk router will somehow help you fix not working issue.

Netgear Nighthawk firmware update will not only help you fix the issue but also help you enhance the overall performance of your router.

Navigate to the Nighthawk official site or download the Netgear router app for instructions to download the latest firmware version for your device.

Fix 4: Restart the Nighthawk Router

If none of the aforementioned fixes helped you out to fix not working issue, then resetting the Netgear Nighthawk device would be the best option for you.

Given below are the instructions that you need to follow in order to restart or power cycle your Netgear Nighthawk router:

  • Firstly, what you have to do – disconnect the Ethernet cable that you have used to connect your Netgear Nighthawk router and modem. And, if you have connected your devices to router using a wireless source – disconnect that as well.

  • Then, unplug your Netgear Nighthawk router from the power socket and wait for some time.

  • Allow your router to take some time. Chances are – due to overheating, your router is giving you issues while accessing the web address.

  • Plug in your router back.

  • Connect your WiFi-enabled devices to the router’s WiFi.

  • To check whether the connection between your device is successfully established or not, download and install the Netgear Nighthawk app.

In a Nutshell

Our guide on how to troubleshoot not working issue ends here. We hope that the tips listed in this post proved helpful to you? However, if you still need help, please let us know via comments.

Related Articles

Back to top button