It is important to hide the SSID of your Linksys Velop AC2200 in order to secure it from potential threats. In this article, we will guide you with the steps to hide the network name (SSID) of your Linksys Velop AC2200.
Here’s how to guide the network name of your Linksys Velop AC2200:
-
Turn on Your Linksys Velop AC2200
-
Start by unboxing your Linksys Velop AC2200 (if it is new).
-
Plug your Linksys Velop into a working wall outlet.
-
Wait for the power LED on your device to become stable.
-
If the LED on your Linksys Velop AC2200 continues to blink and does not become stable, restart it once.
To restart your Linksys Velop AC2200:
-
Turn off your Linksys device by unplugging it from the wall outlet.
-
Plug the device back in after a couple of minutes.
-
Wait till the Velop’s power LED gets stable.
-
Connect the AC2200 to Your Modem
The next step in our post is to create a solid and stable Ethernet connection between your Linksys Velop AC2200 and router. You can also connect the devices using a wireless source. But, ensure to get connected to your home WiFi only. While changing the SSID of your Linksys Velop AC2200 – it is recommended – do not get connected to a public or free hotspot.
-
Access Linksys Velop Router Login Page
-
Now, what you have to do – is power on your desktop or laptop.
-
Launch an up-to-date internet browser of your choice in it.
-
Then, in the address bar of the internet browser, type the default IP of your Linksys Velop AC2200.
-
Press Enter to continue.
-
Enter the Default AC2200 Login Details
Pressing the Enter key will take you to the Linksys Velop router login page. You will be prompted to log in to Linksys Velop AC2200. So, fill in the default Linksys Velop router login details carefully into the required fields and click on Log In.
-
Navigate to the Settings Menu
Once the Linksys WiFi setup page comes into view, go to the settings menu and follow the steps highlighted below in the exact given order in order to get success:
-
Click on the Wireless tab.
-
The Basic Wireless Settings sub-tab will be selected automatically.
-
Click the Disabled radio button next to SSID Broadcast. Doing so will hide the SSID of Linksys Velop AC2200.
-
Click the Save Settings to apply the changes.
-
Kudos! The SSID of your Linksys Velop AC2200 is successfully hidden.
By following the step-by-step instructions listed above, you will surely be able to hide the SSID (WiFi network name) of your Linksys Velop AC2200. In the event that you are facing issues while initiating the process, they might be because of an outdated firmware version. Thus, to get that fixed, update the firmware of your Linksys Velop AC200 right away.
Here’s how to update Linksys Velop AC2200 firmware:
-
On a computer or laptop, launch a web browser of your choice.
-
Enter the default IP of your Linksys Velop AC2200 in the address bar.
-
Navigate to the Router Settings.
-
Click Connectivity.
-
Follow the on-screen instructions.
-
It is strictly recommended – do not to unplug or turn off your Linksys Velop AC2200. Wait for some time till the power LED on your Linksys device turns blue. This will indicate that your Linksys Velop AC2200 is ready.
Once you are done with updating Linksys Velop AC2200, go through the steps listed above and try to hide the device SSID again.
To Sum Up
Hiding the SSID (WiFi network name) of your Linksys Velop AC2200 is one of the best solutions to protect your device WiFi network from intruders. So, if you are looking to secure your device from potential threats by hiding its SSID, then this post would be a great help to you.
If you had any other doubts or queries, feel free to lay them all on us via comments.
