Are you unable to log in to your Netgear router using the default IP? If so, then it can be really frustrating – because, everything depends upon the Netgear router default IP. Be it accessing the www.routerlogin.net setup page or changing the Netgear device default settings, the default IP works everywhere.
But, you don’t have to worry! We’ve got you covered! In this article, we have summed up a number of fixes that will help you resolve Netgear router IP not working issue in no time. Let’s dive in!
Fixed: Netgear Router IP Not Working
Fix 1: Use the Correct IP
One of the major reasons why you are facing Netgear router IP not working issue is because you have used an incorrect IP.
To troubleshoot the issue, ensure the following:
-
Enter the correct IP address without typos
-
Cross-check the Netgear router IP address after typing and prior to hitting the Enter key
-
Use only the browser web address to enter the router’s default IP
-
To avoid login issues, it is suggested – do not use the browser search
-
Refer to the Netgear router manual for more information regarding the default IP
Fix 2: Verify the Ethernet Connection
-
If you have used an Ethernet cable to connect your Netgear router and modem, make sure that it is well-working and free of any sort of dusts and cuts.
-
If you have used a wireless source to connect your devices, then ensure that you are connected to your home WiFi only. Do not get connected to free or public WiFi for accessing the Netgear router default IP.
Fix 3: Contact Your ISP
If you are still unable to access the Netgear router default IP, then it means something is wrong from your service provider’s end. So, what you have to do – contact your ISP and ask him to fix the issue. Maybe you are not getting the expected internet speed, resulting in the issue. In the event that your service provider refuses to fix the issue, give the next troubleshooting tip a try.
Fix 4: Use the Web Address
If you are using the settings page of the Netgear router using the default IP and it is not working, then why not you give the router’s default web address a try. Yes, the router’s default web address, routerlogin.net also helps you to log in to router and access the settings page. But, make sure to enter the default web address without typos. Apart from this, routerlogin.net web address shouldn’t be entered in the browser’s search bar.
Fix 5: Power Cycle the Router
If the above-mentioned troubleshooting fixes doesn’t help you resolve the issue, then the only remedy left that can be effective is to power cycle the Netgear router. Yes, you read it right! This process works on most cases. To power cycle or restart your Netgear router, do the following:
-
Disconnect your Netgear router from your existing modem.
-
Power off your router. Unplug it from the wall outlet.
-
Wait for some time.
-
Plug your Netgear router back in.
-
Press the power button on it.
-
Connect the router to your existing modem using an Ethernet connection or a wireless source.
-
Try to log in to your Netgear device again using the default IP or routerlogin.net web address.
Still no luck? Need not to worry! Give the couple of troubleshooting tips a try!
-
Ensure that your Netgear router is getting continuous power supply.
-
Make sure that the firmware version on your Netgear router is up-to-date.
-
An outdated web browser version may also let you experience Netgear router IP or web address not working issue. To fix it, update the internet browser or switch to another one that is already up-to-date.
-
Clear cache and browsing history and also close all the unwanted open tabs prior to having access to the routerlogin page using the IP or web address.
Anticipating that after following the fixes listed in this article have helped you out to resolve the Netgear router IP not working issue? If you are still struggling with the same, don’t hesitate to drop your queries into the comments section.
